A full screen mode in which Scanlines works properly

Dr_Spankenstein · Post by **Dr_Spankenstein** » Sun Jun 18, 2006 6:49 pm

Following on from this post

http://board.zsnes.com/phpBB2/viewtopic.php?t=7498

I would like a full screen mode where Scanlines are displayed properly.

Ie 768x672 Full Screen

Thankyou.

Deathlike2 · Post by **Deathlike2** » Sun Jun 18, 2006 7:12 pm

As I said in the other thread, this will fail miserably since your video card will most likely NOT support said resolution (it will work in Windowed mode, not full screen). Use the custom res feature first in the latest WIP to see what I mean.

I will tell you in advance that this request will be denied because the custom res option already any system supported res available.

Dr_Spankenstein · Post by **Dr_Spankenstein** » Sun Jun 18, 2006 7:16 pm

Cool thanks for the honest answer man. Just out of noobie interest how do I use the custom resolution option and create my own resolution?

Mike · Post by **Mike** » Sun Jun 18, 2006 7:18 pm

Try using 640x480 that's the best scanlines will do in fullscreen.

Deathlike2 · Post by **Deathlike2** » Sun Jun 18, 2006 7:20 pm

This is currently a two part system (this will change in the next WIP)..

1) In the GUI, there are options labeled "CUSTOM"... they have specific modes associated with them. Select one that is appropriate for what you want (there are no R custom modes yet...)

2) Edit zguicfgw.dat in the folder ZSNES is in... near the bottom is CustomResX and CustomResY.. I shouldn't have to tell you what they do. Make sure to put in a valid res....

Dr_Spankenstein · Post by **Dr_Spankenstein** » Sun Jun 18, 2006 7:31 pm

Many thanks for your help!