Here is what I did so far.
https://s5.postimg.cc/62odpufyv/image.png
First, I go to Config. Then, I go to Saves.
https://s5.postimg.cc/fohy6574n/image.png
Here is the "Save Options" dialog box.
https://s5.postimg.cc/v7fe39ffb/image.png
I point to the "Save" state shortcut, click it, and it told me to press the key (or button) I want to use. I chose the "F1" key.
https://s5.postimg.cc/ly8mfeh5j/image.png
And it happened. Nothing is there. It is not working. No "F1" key.
I used ZSNES v1.51 (Windows).
Not Configuring with the "F1" key in ZSNES
Moderator: ZSNES Mods
Not Configuring with the "F1" key in ZSNES
Last edited by DeriLoko3 on Thu May 10, 2018 10:28 pm, edited 2 times in total.
Nintendo rules!
-
Gil_Hamilton
- Buzzkill Gil
- Posts: 4295
- Joined: Wed Jan 12, 2005 7:14 pm
Re: Not Configuring with the "F1" key in ZSNES
Much like escape, F1 cannot be bound to other keys, as it has a hardwired use.
KHDownloadsSquall_Leonhart wrote:DirectInput represents all bits, not just powers of 2 in an axis.You have your 2s, 4s, 8s, 16s, 32s, 64s, and 128s(crash course in binary counting!). But no 1s.
-
grinvader
- ZSNES Shake Shake Prinny
- Posts: 5632
- Joined: Wed Jul 28, 2004 4:15 pm
- Location: PAL50, dood !
Re: Not Configuring with the "F1" key in ZSNES
Namely, the F1 menu.
皆黙って俺について来い！！
Pantheon: Gideon Zhi | CaitSith2 | Nach | kode54
Code: Select all
<jmr> bsnes has the most accurate wiki page but it takes forever to load (or something)-
Gil_Hamilton
- Buzzkill Gil
- Posts: 4295
- Joined: Wed Jan 12, 2005 7:14 pm
Re: Not Configuring with the "F1" key in ZSNES
I was gonna call it the pop-up menu, but... I decided that was too much typing.
KHDownloadsSquall_Leonhart wrote:DirectInput represents all bits, not just powers of 2 in an axis.You have your 2s, 4s, 8s, 16s, 32s, 64s, and 128s(crash course in binary counting!). But no 1s.