2-player?

celticguardian · Post by **celticguardian** » Sun Mar 06, 2005 8:11 pm

i know you can play 2-player ZSNES if you have two of those controller port thingies, but if you dont have any, can you still play 2-player? if so, how?

Joe Camacho · Post by **Joe Camacho** » Sun Mar 06, 2005 8:20 pm

One can play on the keyboard, while another uses a control pad, also, you could try to setup the controllers on the keyboard, but some keyboards don't allow more than 3 different keys pressed at the same time.

celticguardian · Post by **celticguardian** » Sun Mar 06, 2005 8:37 pm

how would i set new keys? is it in the game or in ZSNES itself? i know some games have control setup, but it will only read certain keys, how do i change them?

kevman · Post by **kevman** » Sun Mar 06, 2005 9:21 pm

Oh, come on. Its not that hard to figure out. I suppose someone had to tell you that the button marked "A" on the keyboard placed an "a" on the screen without someone telling you, becuase you can't figure out on your own.

Seriously, the INPUT # selections under the "Config" (short for configure) are pretty self explainatory. To set the configuration for player 2, simply choose "INPUT #2" under the "CONFIG" drop-down menu. Someone else can explain how drop-down menus work.

Simply press "SET buttons" under the new box that appears and follow the on-screen instructions.

[/asshole]

Post by **Agozer** » Sun Mar 06, 2005 9:36 pm

Well, at least you actually bothered to explain that...

deathtok · Post by **deathtok** » Mon Mar 07, 2005 2:39 am

I'm not one for 'flaming' people online but kevman is right on this. It is much harder to find the ZSNES message board, create an account, and post these questions than it is to run ZSNES for about 10 seconds to at least see the options for this.