Making USB controler
Moderator: ZSNES Mods
Making USB controler
Hey guys, prolly seen a topic like this but its 4 in the morning and im lazy. Anywho, i was wondering if you guys had a guide or link or something to tell me how to make my own SNES controller to plug into my USB ports. I made one for the Xbox the other night and it works but didnt know if the SNES controller would be the same if not easier.
-
- Locksmith of Hyrule
- Posts: 3634
- Joined: Sun Aug 08, 2004 7:49 am
- Location: 255.255.255.255
- Contact:
http://s89078276.onlinehome.us/emubox/s ... apter.html
This post was brought to you in part by the ZSnes board search feature. Thank you and good day.
This post was brought to you in part by the ZSnes board search feature. Thank you and good day.
<Nach> so why don't the two of you get your own room and leave us alone with this stupidity of yours?
NSRT here.
NSRT here.
-
- Dark Wind
- Posts: 1271
- Joined: Thu Jul 29, 2004 8:58 pm
- Location: Texas
- Contact:
The X-Box controller is USB with a different connector. Therefore, all you have to do is swap out the connector, and you get a USB HID-compliant input device.
For an SNES controller -> USB mod, you would have to build an adapter with a microcontroller in it to adapt the signals.
For an SNES controller -> USB mod, you would have to build an adapter with a microcontroller in it to adapt the signals.
[u][url=http://bash.org/?577451]#577451[/url][/u]
Go for the parallel adapter that Link posted.PP Mguire wrote:Thank you for not flaming me. Anyhow, how would i go about doing that. I only want one controller and one plug and i cant afford to go out and buy alot.
TO do it for USB requires the contsruction of a EZ-USB-based system and its programmer. Not easy at all.
SHREIK!!!!!!! DDdddnnnnnnaaaa! GESTAHLLLLLLLLLL!!!!!!!!
Steelers now officially own your ass.
Steelers now officially own your ass.