The Down button

psychoallie · Post by **psychoallie** » Wed Mar 22, 2006 5:06 am

I have a logitech precision controller and everytime i try i configure input#1 it gets stuck. Here is what happens

configure>input #1
Highlight keyb/joyst
Click set
Click set keys

after this i am able to enter the up button on the directional pad for 'up' but when it comes to down i cant enter any buttons....in fact the whol emulator freezes up on me.

I calibrated my game pad and all buttons registered during calibration.

this happens in both versions of the emulator that i tried
and i also tried to re-dl it

snkcube · Post by **snkcube** » Wed Mar 22, 2006 7:10 am

Try deleting the config and dat files.

psychoallie · Post by **psychoallie** » Wed Mar 22, 2006 7:18 am

Just tried it and i have the same problem....doesnt help thanks though

Mike · Post by **Mike** » Wed Mar 22, 2006 9:44 pm

Yeah that happened to me before. but all I did was restart my pc and it worked fine.

psychoallie · Post by **psychoallie** » Thu Mar 23, 2006 12:23 am

Restarted.......still have the same problem

Tantara · Post by **Tantara** » Fri Mar 31, 2006 2:54 am

I'm having the eXact same problem... ever figure it out?

psychoallie · Post by **psychoallie** » Fri Mar 31, 2006 3:11 am

No im sorry i never did figure it out... looks as if everyone gave up on me

Mike · Post by **Mike** » Fri Mar 31, 2006 3:13 am

Try using the latest WIP and see if the problem still occurs.

psychoallie · Post by **psychoallie** » Fri Mar 31, 2006 3:15 am

I have... thats what i was refering to when i said i tried both versions

Mike · Post by **Mike** » Fri Mar 31, 2006 3:20 am

That latest WIP was release yesterday.

psychoallie · Post by **psychoallie** » Fri Mar 31, 2006 3:24 am

oh im sorry i thought you were talking about the one before that.... ill give it a try! ty

SeerNo · Post by **SeerNo** » Sun Apr 02, 2006 5:39 am

I have the exact same problem. I've tried zSNES 1.4.2 and the latest WIP. I've installed from scratch, rebooted, deleted config files, etc. and nothing seems to fix it.

Any ideas?

I have a logitech controller also.

psychoallie · Post by **psychoallie** » Sun Apr 02, 2006 6:03 am

Yea the new wip doesnt work for me either...

Mike · Post by **Mike** » Sun Apr 02, 2006 6:35 am

Are you sure it isn't your controller?

psychoallie · Post by **psychoallie** » Sun Apr 02, 2006 6:38 am

Do you think that there is the exact same problem with three other controllers

Mike · Post by **Mike** » Sun Apr 02, 2006 6:43 am

What is your system specs?

psychoallie · Post by **psychoallie** » Sun Apr 02, 2006 7:00 am

80 GB Hard Drive
512 MB RAM
Windows XP 64 bit

Mike · Post by **Mike** » Sun Apr 02, 2006 8:09 am

hmm.. it's a wierd problem. I really don't understand what can be the problem.

psychoallie · Post by **psychoallie** » Sun Apr 02, 2006 8:13 am

Well maybe the problem lies with the brand of controller..... has anyone had any luck using a logitech controller with the zsnes program

psychoallie · Post by **psychoallie** » Sun Apr 02, 2006 8:14 am

My controller didnt require me to install anything....windows did it atuomatically when i plugged it in

UnduTheGun · Post by **UnduTheGun** » Sun Apr 02, 2006 12:53 pm

I have a logitech RumblePad 2 and it worl well, have you installed the drivers?

Or maybe is an issue with that model.

SeerNo · Post by **SeerNo** » Sun Apr 02, 2006 4:15 pm

Mine is a Logitech Dual Action Gamepad (http://www.logitech.com/index.cfm/produ ... ENTID=6951)

It works fine with every other aspect of windows (calibration, other games, other emulators, my own programs, etc.).

Also, the problem isn't the down button per se, it hangs after the first button you assign to the controller. For example, you can assign the first 3 directions to keyboard, 4th direction to joypad, and then it hangs on the 5th button to assign.

Doesn't windows abstract away the differences between the various joypads? How could it be specific to logitech gamepads? Bizarre...

Mike · Post by **Mike** » Mon Apr 03, 2006 4:55 am

It only happens with the down button?

psychoallie · Post by **psychoallie** » Mon Apr 03, 2006 4:58 am

well it happens when i get to the spot that the down button should be configured to....if i were to press the down button where the up button should be it works......its just down is then up

PHoNyMiKe · Post by **PHoNyMiKe** » Mon Apr 03, 2006 5:54 am

maybe click the box below "down" and configure all the other keys 1 by 1 by clicking the box and pressing the controller.

ZSNES board

The Down button

The Down button

Uh-uh

The Down Button

The Down Button