Pro Action Replay 3

Post by **badinsults** » Sat Apr 07, 2007 10:10 am

So I totally ripped the switch on the side right off. I was wondering if I took a few wires and connected them in the right order, would that work just as well? I imagine that if there are three positions of the switch, that when the switch is in any particular position, that two of the connectors are in a circuit.

SquareHead · Post by **SquareHead** » Sat Apr 07, 2007 2:47 pm

Sounds to me like it should work. You could probably go to an electronics store and pick up a single pole double throw switch for cheap and just solder a new one on.

PHoNyMiKe · Post by **PHoNyMiKe** » Sat Apr 07, 2007 5:19 pm

it's a pretty tiny switch. you'd have to have a huge one sticking out the side.

SquareHead · Post by **SquareHead** » Mon Apr 09, 2007 12:18 am

These aren't that big, don't know if you have a Rat Shack in your area though.

Here