ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.
Use ZSNES -? for command line definitions.
This is a work in progress build. It contains code which
May or may not be complete
ZSNES could not find any joysticks.
That's the output.
I tried disconnecting, then reconnecting the controller and here's what syslog says.
syslog wrote:
usb 4-1: new low speed USB device using uhci_hcd and address 4
input: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:10.3-1
Tried my Logitech Wingman Action and it still didn't work
syslog wrote:
usb 4-1: new low speed USB device using uhci_hcd and address 5
input: USB HID v1.10 Joystick [Logitech WingMan Action Pad] on usb-0000:00:10.3-1
ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.
Use ZSNES -? for command line definitions.
This is a work in progress build. It contains code which
May or may not be complete
ZSNES could not find any joysticks.
Anyway, go Applications>Debian Menu>Apps>System>Kcontrol
In the KDE control center, check joysticks under the peripherals area, and see if you gamepad(s) show in there. If they show in there, try calibrating them.